If you’re looking to refresh the look of your wooden furniture or floors, sanding stained wood to restain is an effective solution. This comprehensive guide will walk you through each step, ensuring that even beginners can achieve professional results.
From Pexels.com by Tirachard Kumtanom
Sanding Stained Wood to Restain: Materials You’ll Need
- Sanding paper (various grits)
- Wood stain
- Wood finish
- Paintbrushes
- Clean rags
- Painter’s tape
- Drop cloths
Safety Precautions
Before you begin sanding stained wood to restain, make sure to wear safety goggles and a dust mask. Open windows or use fans to ensure proper ventilation.
Preparation
- Remove any hardware or fixtures from the wood.
- Place drop cloths to protect the surrounding area.
- Use painter’s tape to mask off areas you don’t want to sand or stain.
Sanding Process
- Start with a coarse-grit sandpaper, such as 80-grit, to remove the old stain.
- Switch to a medium-grit, like 120-grit, to smooth the surface.
- Finish with a fine-grit, such as 220-grit, for a polished look.
- Wipe down the wood with a clean rag to remove dust.
For more articles on sanding, click here: Sanding: Your Full-Circle Guide to Smooth Mastery
Restaining
- Apply a thin coat of wood stain using a paintbrush.
- Wipe off excess stain with a clean rag.
- Allow the stain to dry according to the manufacturer’s instructions.
Finishing Touches
- Apply a wood finish for added protection.
- Allow the finish to dry completely.
- Reattach any hardware or fixtures.
